Setting up...
White Rabbit Automation System
Your configuration data has changed Hello, {{loggedInUserName()}}
MONITORING CENTER NOT IN SYNC Help Logout

Welcome to White Rabbit

It looks like you've added a new White Rabbit hub to your network. We're going to ask you a few questions to help set up your account, then you'll be able to start configuring your system. Don't worry, everything you set up here can also be changed later.

MAC ID: {{provisioning.accountId}}

In order to find your hardware, we'll need the hardware ID from your hub. Please locate the label on your hub, look for MAC ID, and enter it below.

I accept the terms of the agreement

In order to configure your alarm monitoring, we'll need the 5-digit Dealer ID from your packaging. The label is just under the flap on the box for your smart hub.

Are you using this hub in a residential or commercial environment?

Tell us a little about your installation site.

Now, let's create an initial user account for you.

Your email address will also be your login

Finally, tell us what you'd like to call the area this hub covers and what you'd like to call the first room in the room list.

That's all the questions we have! Click 'Done' to create your account and go to your account page.

Loading account information. Please wait...
{{area.description}}
{{currentStatus[area.area].text}}
Auto stay: {{currentStatus[area.area].auto_stay ? 'enabled' : 'disabled'}} Auto away: {{currentStatus[area.area].auto_away ? 'enabled' : 'disabled'}}
{{action.text}}
Why can't my alarm system be armed?
{{message.message}} {{custsvc.deviceById(message.deviceId).auto_bypass ? '' : '[Auto-bypass is disabled]'}}
Ignore and arm away
One or more devices cannot be auto-bypassed. The system cannot be armed until the device is cleared or you enable auto-bypass for the device.
{{alarm.event}}
Date:{{alarm.date}}
Reporting status:{{alarm.status}}
Area:{{lookup.areaNameById(alarm.area)}}
Triggering device:{{alarm.pointid}}
Zone:{{alarm.zone}}
User:{{alarm.user}}
Return to room list
Filters have been applied to the device list. To see the entire list, remove the filters.
General Settings

 seconds

 seconds

Auto-Arm Stay Settings

to

 minutes

Auto-Arm Away Settings

to

ENABLED DISABLED
User Details

Change password

View/Change

Phone Details

Privacy
"{{camera.description}}" in room "{{getRoomForDevice(camera.room)}}"
"{{camera.description}}" in room "{{getRoomForDevice(camera.room)}}"
ENABLED DISABLED
What will trigger this action to occur?

{{formatTriggerText(currentTrigger)}}

What steps should be taken when the action is triggered?
Warning: the step list time exceeds the trigger interval. The action will not be able to fire on the specified interval.
Add another step Replace this step list with a saved one Run this step list now
Log when action is activated
Schedule InformationRemove this schedule


DayFromTo
Address Information

{{customer().header.firmware}}

to

{{customer().header.arc}}

General Preferences

Unit Preferences

New log entries have arrived since you last refreshed.
Time Action User
{{entry.dateValue}}   {{entry.timeValue}} {{entry.text}} {{entry.user_name}}
Communicating with server...